Evaluation of the extraction performance of commercial ground roasted coffee

Authors

  • Luz Alba Caballero Pamplona University.
  • Jessica Ortega Pamplona University.
  • Lida Maldonado Pamplona University.

DOI:

https://doi.org/10.24054/limentech.v12i1.1589

Keywords:

Diluted coffee, Extract, Particle size, Yield, Soluble solids

Abstract

The coffee extraction process can be defined as the operation by which hot water moistens roasted and ground coffee, dissolving the chemical compounds responsible for aroma and flavor. The objective was to evaluate the extraction process performance of commercially roasted coffee samples. The work was carried out in the Coffee Technology Laboratory at the University of Pamplona. Three commercial brands most consumed in the region were selected, and particle size and soluble solids analyses were performed. The grinding process was evaluated according to NTC 2421, and the extraction process performance was evaluated according to NTC 2442, in order to obtain the highest extraction of soluble solids in relation to particle size. Two methods were used to determine soluble solids in commercial coffee beverages: Direct drip method: for medium granulometry, NTC 4602-1 was applied and the Direct contact method: for coffee with coarse granulometry, NTC 4602-2; to determine the yield in each coffee maker used, the same conditions and variables were taken into account for each extraction method. The results obtained were analyzed by analysis of variance (ANOVA), with a degree of significance of 5%, establishing whether there were significant differences between the samples evaluated. It was concluded that the process conditions that influenced the extraction yield of the 3 samples evaluated were: the variation in particle size and the content of soluble solids in the extract.

Downloads

Download data is not yet available.

References

Castaño C, J.J., Quintero, G., y Vargas R.L. (2000). Caracterización del rendimiento de extracción y del contenido de la bebida del café. Revista Cenicafe 51(3): 185- 195.

Castaño C, J.J y Quintero, G. (2001). Optimización de la torrefacción de las mezclas de café sano y brocado en función de la temperatura y el agua de apagado. Revista de Cenicafe 52 (1): 49-73.

Cuellar S, P.C y Castaño C, J.J. (2001). Influencia en la materia prima, del grado de tostión y molienda en la densidad del grano tostado y molido sobre algunas propiedades del extracto obtenido. Revista Cenicafe 52(2): 147-140.

Clarke R, J; Macrae, R. (1985). Coffee chemistry, volume 1, London, Elsevier applied Sciences 306 p.

Clarke R, J; Macrae, R. (1987). Coffee Technology, volume 2, London, Elsevier applied Sciences 321 p.

Davids, K. Coffee. (1991). A guide to buying, brewing & enjoying. Santa Rosa, C.A. 101. Productions /Cole Group, Inc,. 254 p.

Illy, A; Viani, R. (1995). Espresso Coffee: the chemistry of quality. London. Academic Press. 253 p.

Lingle Ted, Coffee Brewing Center. (1996). The coffee brewing handbook. A systematic guide to coffee prepartion. Long Beach. California, Specialty Coffee Association of America. 1996. 60 p.

Lockhart, E. E. (1957). The soluble solids in beverage coffee as an index to cup quality. New York the coffee brewing institute,13 p.

Medina A., J.L.; Riaño L., C.E. (2006). Evaluación del rendimiento de extracción en algunas cafeteras. CENICAFE. 57(1):31-36.

INSTITUTO COLOMBIANO DE NORMAS TECNICAS,

ICONTEC. NTC 4602-1. Determinación del rendimiento de la extracción y de los solubles en la bebida del café. Parte 1. Método por goteo directo. ICONTEC, Bogotá.1997. 4p.

INSTITUTO COLOMBIANO DE NORMAS TECNICAS,

ICONTEC. NTC 4602-2. Café tostado y molido. Determinación del rendimiento de la extracción y de los solubles en la bebida del café. Parte 2. Método por contacto directo. ICONTEC, Bogotá.1997. 5p.

Peters, A. (1991). Brewing makes the difference. in COLLOQUE Scientifique Internationale sur le Café, 14 San Francisco, juillet 14-19, Paris ASIC 1991.P. 97-106.

Veree, P.H.; Yeransian, J.A. (1973). Determination soluble solids in roasted coffee. Journal of Association Official Analysis Chemist 56(5): 1126-1129.

Villegas M, C. P. (1998). Influencia de la materia prima en las características fisicoquímicas del extracto diluido del café. Manizales; Tesis Universidad Nacional, Ingeniería Química.

Published

2014-06-29

How to Cite

Caballero , L. A., Ortega , J., & Maldonado, L. (2014). Evaluation of the extraction performance of commercial ground roasted coffee. @limentech, Ciencia Y Tecnología Alimentaria, 12(1), 40–47. https://doi.org/10.24054/limentech.v12i1.1589

Issue

Section

Artículos

Most read articles by the same author(s)