Estudio de estabilidad de vehículos pesados
DOI:
https://doi.org/10.24054/rcta.v2i30.180Keywords:
Vehículos pesados, estabilidad, límite de vuelco estático, límites de velocidad, seguridad vialAbstract
La estabilidad de vehículos pesados es un tema ampliamente estudiado en la actualidad, dado que de esta forma es posible comprender una de las principales causas de accidentes vehiculares: el vuelco de vehículos. El objetivo principal de los investigadores es determinar una forma de predecir el comportamiento de un vehículo bajo ciertas condiciones de operación. En este sentido, en este artículo se compara el análisis clásico de estabilidad de un vehículo en dos dimensiones y un análisis de estabilidad de un modelo tridimensional utilizando la misma metodología.
References
CAN (2013). Accidentes de Tránsito en la Comunidad Andina – Documento Estadístico
Castro, R.; Moreno, J.; Gonzalez, H.; Lengerke, O. (2013). Fuzzy speed control for trajectory follow-up of a robot moving on vertical surfaces. Revista Colombiana de Tecnologias de Avanzada. ISSN: 1692-7257 – v. 2, – n. 22, p 34-41.
Chang, T. (2001). Effect of Vehicles´ Suspension on Highway Horizontal Curve Design. Journal of Transportation Engineering, v. 127, n. 1, p. 89–91.
Correa, D.; Sanabria, F.; Sandoval, W.; Claros, R. (2010). Cooperative service robots. Revista Colombiana de Tecnologias de Avanzada. ISSN: 1692-7257 – v. 2, – n. 16, p 119-127.
Duarte, T.; Mendoza, Y.; Arévalo, A.; Guerrero, T. (2015). Modelation of Modal Election for Urban Public Transport Based on the Introduction of a New Mode. Revista Colombiana de Tecnologias de Avanzada. ISSN: 1692-7257 – v. 1, – n. 25, p 83-91.
Garbarino, S.; Durando, P.; Guglielmi, O.; Dini, G.; Bersi, F.; Fornarino, S.; Toletone, A.; Chiorri, C.; Magnavita, N. (2016) Sleep Apnea, Sleep Debt and Daytime Sleepiness Are Independently Associated with Road Accidents. A Cross-Sectional Study on Truck Drivers. PLOS ONE, v 11, n 11, p. 1-12, doi:10.1371/journal. pone.0166262
Gillespie, T. D. (1992) Fundamentals of Vehicle Dynamics. 7th. ed. Warrendale, PA.: SAE International, 1992. ISBN 1560911999
Hac, A. (2002) Rollover Stability Index Including Effects of Suspension Design. SAE International - SAE 2002 World Congress, Detroit-USA, March 4–7.
Imine, H.; Benallegue, A.; Madani, T.; Srairi, S. (2014). Rollover risk prediction of heavy vehicle using high order sliding mode observer: experimental results. IEEE Transactions on Vehicular Technology, v. 63, n. 6, p. 2533–2543.
IPEA. (2015). Estimativa dos Custos dos Acidentes de Trânsito no Brasil com Base na Atualização Simplificada das Pesquisas Anteriores do Ipea. IPEA - Instituto de Pesquisa Econômica Aplicada. Brasília.
ISO-14792. (2011). Heavy commercial vehicles and buses - Steady state circular tests. International Organization for Starndardization. Geneva, Switzerland.
Kamnik, R.; Boettiger, F.; Hunt, K. (2003). Roll dynamics and lateral load transfer estimation in articulated heavy freight vehicles. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Sage Publications Sage UK: London, England, v. 217, n. 11, p. 985–997.
Lui, P.; Rakheja, S.; Ahmed, A. (1997). Detection of Dynamic Roll Instability of Heavy Vehicles for Open-Loop Rollover Control. In: 1997 International Truck and Bus Meeting. Cleveland, Ohio.: SAE Special Publications 1308 - SAE Paper No. 973263, 1997. p. 105–112.
Moreno, G. G., Barreto, R. L. P., Vieira, R. S., Nicolazzi, L., Martins, D. (2016). Book chapter. Graph-Based Modelling in Engineering. Ed. Zawíslak, S and Rysínski, J. Chapter 9: Three-Dimensional Analysis of Vehicle Stability Using Graph Theory. Springer International Publishing, Switzerland. ISBN 978-3319390185.
DOI 10:1007=978-3-319-39020-8_9.
Muñoz, A.; Carreño, Y.; Pardo, A. (2012). Intelligent Control Systems for Vehicular Traffic. Revista Colombiana de Tecnologías de Avanzada. ISSN: 1692-7257 – v. 2, – n. 20, p 9-16.
Rill, G. (2011). Road Vehicle Dynamics: Fundamentals and Modeling. Boca Ratón, Florida: CRC Press. ISBN 978-1-4398-3898-3.
Torres, C.; Archila, J.; Tronco, M.; Becker, M.; Viera, A.; Tiberti, A. (2013). Kinematic study of an agricultural robotic platform. Revista Colombiana de Tecnologias de Avanzada. ISSN: 1692-7257 – v. 2, – n. 22, p 131-137.
Winkler, C. (1987). Experimental Determination of the Rollover Threshold of Four Tractor-Semitrailer Combination Vehicles. UMTRI Research Review, The University of Michigan Transportation Research Institute. Ann Arbor, Detroit.
Winkler, C. (2000). Rollover of Heavy Commercial Vehicles. UMTRI Research Review, The University of Michigan Transportation Research Institute, v. 31, n. 4, p. 1–20.
Downloads
Published
Versions
- 2017-07-02 (4)
- 2017-07-02 (3)
- 2017-07-02 (2)
- 2020-10-22 (1)
How to Cite
Issue
Section
License
Copyright (c) 2017 REVISTA COLOMBIANA DE TECNOLOGIAS DE AVANZADA
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors publishing in this journal agree to the following conditions:
- Authors retain the moral rights of authorship and grant the journal the right of first publication of the work. This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0 DEED), allowing third parties to use the work provided appropriate credit is given to the authors and the first publication in this journal. Commercial use of the work is not permitted, and derivative works cannot be created.
- Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the article (for example, including it in an institutional repository or publishing it in a book), provided that the work is clearly indicated as having first been published in this journal.
- Authors are permitted and encouraged to post their work online (e.g., on institutional or personal websites) before and during the review and publication process, as it can lead to productive exchanges and greater and faster dissemination of the published work.