ALGORITMOS Y SISTEMAS BASADOS EN PATRONES DE CÉLULAS MADRES Y CLONACIÓN ARTIFICIAL PARA LA AUTOMATIZACIÓN Y CONTROL DE UNA OPERACIÓN ENSAMBLE EN PROCESOS METALMECÁNICOS
DOI:
https://doi.org/10.24054/rcta.v1i25.421Keywords:
Patrones de células madres y clonación Artificial, algoritmos genéticos, replicas funcionalesAbstract
En el presente trabajo se muestra el desarrollo de Algoritmos y sistemas basados en patrones de células madres y clonación Artificial aplicada en una operación de ensamble en procesos metalmecánicos de fabricación; la metodología de Clonación
Artificial aplicada, surge como una alternativa para el desarrollo de medios, equipos de medición y de control avanzados, que permiten responder a las exigencias de la modernización industrial, a través de réplicas funcionales (clones) de sensores,
controladores y actuadores basadas en técnicas de inteligencia artificial; en ellos se aplican métodos y procedimientos de clonación artificial y computación evolutiva.
References
I. Lache, F. Muñoz. (2013). “Investigación de
nuevos prototipos de sensores y sistema de
control por clonación artificial, basados en
técnicas de inteligencia artificial” [En línea].
Disponible:
http://ivanovichlache.googlepages.com/PaperPa
mILS.doc [Consultado 3 Febrero 2013]
J.S.R Jang y Sun C.T. (1993). Funcional
Equivalence Berween Radial Basis Funtion
Networks and Fuzzy Inference Systems. IEEE
Transactions on Neuronal Networks.
K.F. Man and K.S. Tang. (2007). Genetic
Algorithms for Control and Signal Processing,
Department of Electronic Engineering City
University of Hong Kong
F. Muñoz, A. Pardo. (2004). “The technology of
advanced control of applied artificial cloning to
highly precise”. IEEE International Symposium
on Intelligent Control, pp 714 – 718.
J.-S. R. Jang. (1993). "ANFIS: adaptive-network
based fuzzy inference system," IEEE
Transactions on Systems, Man and Cybernetics,
vol. 23, pp. 665-685, 1993.
F. Muñoz. (2006). Sistemas de control inteligentes
de la planta de viscorreducción basados en la
clonación artificial de un sensor de viscosidad
y parámetros asociados, Revista Colombiana
de Tecnologías de Avanzada, Vol. 1, No. 7,
Universidad de Pamplona, Colombia.
F. Muñoz y M. Muñoz, (2010). Diseño de un
sistema de control basado en clonación artificial
Revista Colombiana de Tecnologías de
Avanzadas, Vol. 2, No. 16, pp. 24 – 31.
R. Haber and H. Unbehauen. (1990). "Structure
identification of nonlinear dynamic systems – A
survey on input/output approaches,"
Automatica, vol. 26, pp. 651-677.
Downloads
Published
Versions
- 2015-01-02 (5)
- 2015-01-02 (4)
- 2015-01-02 (3)
- 2015-01-02 (2)
- 2021-01-14 (1)
How to Cite
Issue
Section
License
Copyright (c) 2015 REVISTA COLOMBIANA DE TECNOLOGIAS DE AVANZADA
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors publishing in this journal agree to the following conditions:
- Authors retain the moral rights of authorship and grant the journal the right of first publication of the work. This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0 DEED), allowing third parties to use the work provided appropriate credit is given to the authors and the first publication in this journal. Commercial use of the work is not permitted, and derivative works cannot be created.
- Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the article (for example, including it in an institutional repository or publishing it in a book), provided that the work is clearly indicated as having first been published in this journal.
- Authors are permitted and encouraged to post their work online (e.g., on institutional or personal websites) before and during the review and publication process, as it can lead to productive exchanges and greater and faster dissemination of the published work.