LSSVM aplicada en la estimación de la resistencia de rotor en motor de inducción jaula de ardilla
DOI:
https://doi.org/10.24054/rcta.v1i21.1895Keywords:
Motor de inducción, control vectorial, resistencia de rotor, LSSVMAbstract
En este artículo se estima la resistencia de rotor presente en la dinámica de un motor de inducción Jaula de Ardilla aplicando LSSVM en regresión. El problema es que la resistencia de rotor es difícil de medir por lo que se requiere estimarla. Además, de ser afectada por el incremento en la temperatura, conllevando a que la constante de tiempo del rotor cambie y afecte los parámetros del motor. Se plantea un modelo del motor, en Simulink de Matlab, del cual se extrae la data, se preprocesa y se aplica el algoritmo LSSVM en regresión con Kernel no lineal RBF y la optimización de gamma se hace por validación cruzada. La medición del desempeño del modelo se utilizó la raíz cuadrada del error medio de predicción. Obteniendo buenos resultados.
References
Aller, J. M. (2006). Máquinas Eléctricas Rotativas: Introducción a la Teoría General, Editorial Equinoccio, Universidad Simón Bolívar, Caracas, Venezuela.
Álvarez, M.; Henao, R. y Duque, E. (2007). Clasificación de Eventos Sísmicos Empleando Procesos Gaussianos. Scientia Et Technica, vol. XIII, núm. 35, agosto, 2007, pp. 145-150.
Basak, D.; Pal, S. and Chandra Patranabis, D. (2007). “Support Vector Regression”, Neural Information Processing – Letters and Reviews, Vol. 11, No. 10, India.
Blaschke, F. (1972). “The principle of field orientation as applied to the new transvector closed loop control for rotating machines”, Siemens Review, Vol 30, no. 5, pp. 217-220.
Díaz, J. L. (2000). Control por Campo Orientado del Motor de Inducción con adaptación de los parámetros por modelo de referencia, Tesis de Maestría, UCLV, Santa Clara, Cuba.
Durán Acevedo, C. M. (2005). Diseño y optimización de los subsistemas de un sistema de olfato electrónico para aplicaciones agroalimentarias e industriales, Universidad Rovira i Virgili, Cataluña, España, pp. 59-60.
Huerta, P. F. y González, J. (2005). Estimación de la Resistencia del Rotor en el Control Vectorial Indirecto del Motor de Inducción utilizando una Red Neuronal Artificial, México, D. F.
Jaramillo Garzón, J. A. (2007). Metodología de optimización de los parámetros de control de un algoritmo genético, Manizales Colombia.
Maldonado Alarcón, S. (2007). Utilización de Support Vector Machines no Lineal y Selección de Atributos para Credit Scoring, Chile.
Resendiz Trejo, J. A. (2006). Las máquinas de vectores de soporte para identificación en línea, México, D.F., Sep.
Rojas, I.; Pomares, H.; Gonzáles, J.; Bernier, J.; Ros, E.; Pelayo, F. y Prieto, A. (2000). Analysis of the functional block involved in the design of radial basis function networks. Neural Processing Letters, 12:1–17.
Rubio Flores, G. (2010). Modelos Avanzados de Inteligencia Computacional para Aproximación Funcional y Predicción de Series Temporales en Arquitecturas Paralelas, España.
Rubio, G.; Guillen, A.; Herrera, L. J.; Pomares, H. y Rojas, I. (2008). Use of specific to problem kernel functions for time series modeling. In ESTSP’08: Proceedings of the European Symposium on Time Series Prediction, pp. 177–186.
Rubio, G.; Pomares, H.; Rojas, I.; Herrera, L. J., y Guillén, A. (2009). Efficient optimization of the parameters of LSSVM for regression versus cross-validation error. ICANN, pp. 406–415.
Seijas Fossi, C. y Caralli D’Ambrosio, A. (2004). Uso de las Máquinas de Vectores de Soporte para la Estimación del Potencial de Acción Celular, Ingeniería UC, abril, vol. 11, número 001, Universidad de Carabobo, Valencia, Venezuela, pp. 56-61, 2004.
Sixto Berrocal, J. (2004). Control Vectorial del Motor de Inducción en Bajas Velocidades, Instituto Politécnico Nacional, México, D.F.
Valdés, G. D. (2007). Prónostico Del Precio Del Oro Mediante Least Square Support Vector Machine (LSSVM), Univ. de las Américas.
Vapnik, V. (1995). The Nature of Statistical Learning Theory, Springer-Verlag, New York.
Vapnik, V. and Lerner, A. (1963). Pattern recognition using generalized portrait method, Automation and Remote Control, 24.
Vas, P. (1990). Vector control of AC machines: Clarendon Press Oxford.
Villasana, S.; Caralli, A.; Seijas, C.; Villanueva, C.; Saenz L. y Arteaga, F. (2006). Un novedoso método para estimar la resistencia rotórica del motor de inducción usando máquinas de vectores de soporte, Rev. Ingeniería UC. Vol. 13, No. 1, Venezuela.
Wang, H. and Hu, D. (2005). Comparison of SVM and LSSVM for regression, Shanghai, Jiao Tong University, IEEE Press.
Xu, R. R., Bian, G. X and Chen T. L. (2005). Discussion about nonlinear time series prediction using least squares support vector machine. Communications in Theoretical Physics, 43:1056–1060.
Downloads
Published
Versions
- 2013-01-02 (5)
- 2013-01-02 (4)
- 2013-01-02 (3)
- 2013-01-02 (2)
- 2022-11-08 (1)
How to Cite
Issue
Section
License
Copyright (c) 2013 REVISTA COLOMBIANA DE TECNOLOGIAS DE AVANZADA (RCTA)
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors publishing in this journal agree to the following conditions:
- Authors retain the moral rights of authorship and grant the journal the right of first publication of the work. This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0 DEED), allowing third parties to use the work provided appropriate credit is given to the authors and the first publication in this journal. Commercial use of the work is not permitted, and derivative works cannot be created.
- Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the article (for example, including it in an institutional repository or publishing it in a book), provided that the work is clearly indicated as having first been published in this journal.
- Authors are permitted and encouraged to post their work online (e.g., on institutional or personal websites) before and during the review and publication process, as it can lead to productive exchanges and greater and faster dissemination of the published work.