Persistent photoconductivity in strontium titanate fibers, estimation of surface and deep traps
DOI:
https://doi.org/10.24054/bistua.v21i1.2404Keywords:
Persistent photoconductivity, LHPG technique, Strontium titanate, Growth of single crystal fibersAbstract
The growth of single-crystalline fibers of SrTiO3 using the LHPG technique is reported, in which persistent photoconductivity (PPC) was observed. The study was conducted for three cases of PPC induction. The average PPC time was determined for each case by estimating the carrier lifetimes in the recombination and trap states. The presence of surface and deep traps, along with their respective activation energies, was also estimated.
Downloads
References
Jiang, "Persistent photoconductivity in II-VI and III-V semiconductor alloys and a novel infrared detector," Journal of Applied Physics, vol. 69, no. 9, pp. 6701-6703, 1991, DOI: 10.1063/1.348889.
Reemts, "Persistent photoconductivity in highly porous ZnO films," Journal of Applied Physics, vol. 101, no. 1, p. 013709, 2007, DOI: 10.1063/1.2407264.
Poole, "Large Persistent Photoconductivity in Strontium Titanate at Room Temperature," MRS Proceedings, vol. 1792, p. mrss15--2090706, 2015, DOI: 10.1557/opl.2015.531.
Jia, "Unraveling the Mechanism of the Persistent Photoconductivity in Organic Phototransistors," Advanced Functional Materials, vol. 29, no. 45, p. 1905657, 2019, DOI: 10.1002/adfm.201905657.
Bachí, "Propiedades fotoconductoras de monocristales y láminas delgadas de titanato de estroncio," Universidad Nacional de Tucumán, 2017.
Reyes, "Single-crystal SrTiO3 fiber grown by laser heated pedestal growth method: influence of ceramic feed rod preparation in fiber quality," Materials Research, vol. 1, no. 1, pp. 11-17, 1998, DOI: 10.1590/S1516-14391998000100004.
Tarun, "Persistent Photoconductivity in Strontium Titanate," Physical Review Letters, vol. 111, no. 18, p. 187403, 2013, DOI: 10.1103/PhysRevLett.111.187403.
Guzmán, "Estudio de trampas y centros de recombinación en películas delgadas de compuestos híbridos orgánicos/inorgánicos con estructura Perovskita," Universidad Nacional, 2019.
Rueda J.E, Hernandes A.C., "Growth of monocrystalline stronium titanate fibers by laser melting," in Iberoamerican congress on surface, materials and vacuum applications and xxxv brazilian congress on vacuum applications in industry and science (Congresso), vol. 1, no. 1, 2015.
Rueda J.E, Hernandes A.C., "Monocrystalline fiber growth technique: New critical radius consider," Journal of Crystal Growth, vol. 5, 2021, DOI: j.jcrysgro.2021.126199.
V.V. Prokofiev, J.P. Andreeta, C.J. de Lima, M.R.B. Andreeta, A.C. Hernandes, J.F. Carvalho, A.A. Kamshilin, T. Jaaskelainen, "The influence of temperature gradients on structural perfection of single-crystal sillenite fibers grown by the LHPG method," Optical Materials, vol. 4, pp. 521-527, 1995, DOI: 0925-3467(94)00123-5.
M.R.B. Andreeta, E.R.M. Andreeta, A.C. Hernandes, R.S. Feigelson, "Thermal gradient control at the solid-liquid interface in the laser-heated pedestal growth technique," Journal of Crystal Growth, vol. 234, pp. 754-761, 2002, DOI: S0022-0248(01)01736-5.
G. Boulon, M. Ito, C. Goutaudier, Y. Guyot, "Advances in growth of fiber crystal by the LHPG technique. Application to the optimization of Yb3+-doped CaF2 laser crystals," Journal of Crystal Growth, vol. 292, pp. 230-235, 2006, DOI: j.jcrysgro.2006.04.020.
P-Y Chen, C-L Chang, C-W Lan, W-H Cheng, S-L Huang, "Two-Dimensional simulations on heat transfer and fluid flow for yttrium aluminium garnet single-crystal fiber in Laser-Heated Pedestal Growth System," Jpn. J. Appl. Phys., vol. 48, pp. 115504-115507, 2009, DOI: 10.1143/JJAP.48.115504.
M.R.B. Andreeta, A.C. Hernandes, "Laser-Heated Pedestal Growth of Oxide Fibers," Handbook of Crystal Growth, Part.B Crystal Growth from Melt Techniques, Springer, 2010, pp. 393-432, DOI: 978-3-540-74761-1_13.
Bera, S., Ohodnicki, P., Collins, K., et al, Liu, B., Buric, M., "Dopant segregation in YAG single crystal fibers grown by the laser heated pedestal growth technique," Journal of Crystal Growth, vol. 547, p. 125801, 2020, DOI: j.jcrysgro.2020.125801.
Y. Lu, D. Jia, F. Gao, T. Hu, Z. Chen, "First-principle calculations of the thermal properties of SrTiO3 and SrO(SrTiO3)n (n=1,2)," Solid State Communications, vol. 201, pp. 25-30, 2015, DOI: j.ssc.2014.09.011.
K. Nassau, A.E. Miller, "Strontium titanate: an index to the literature on properties and the growth of single crystals," Journal of Crystal Growth, vol. 91, pp. 373-381, 1988, DOI: 0022-0248(88)90254-0.
F. Kamutzki, C. Guguschev, D. J. Kok, R. Bertram, U. Juda and R. Uecker, "The influence of oxygen partial pressure in the growth atmosphere on the coloration of SrTiO3 single crystal fibers," CrystEngComm, vol. 18, p. 5658, 2016, DOI: 10.1039/C6CE01109H.
Rueda-P, Jorge-E ; Hernandes, C.A., "Crecimiento de fibras mono-cristalinas de titanate de estroncio utilizando la técnica LHPG," Revista Bistua, vol. 13, no. 2, pp. 24-28, 2015.
Additional Files
Published
Versions
- 2023-07-25 (2)
- 2023-07-24 (1)
How to Cite
Issue
Section
License
Copyright (c) 2023 © Autores; Licencia Universidad de Pamplona.
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
© Autores; Licencia Universidad de Pamplona
