LSSVM APLICADA EN LA ESTIMACIÓN DE LA RESISTENCIA DE ROTOR EN MOTOR DE INDUCCIÓN JAULA DE ARDILLA
DOI:
https://doi.org/10.24054/rcta.v1i21.1895Keywords:
Motor de inducción, control vectorial, resistencia de rotor, LSSVMAbstract
En este artículo se estima la resistencia de rotor presente en la dinámica de un motor de inducción Jaula de Ardilla aplicando LSSVM en regresión. El problema es que la resistencia de rotor es difícil de medir por lo que se requiere estimarla. Además, de ser
afectada por el incremento en la temperatura, conllevando a que la constante de tiempo del rotor cambie y afecte los parámetros del motor. Se plantea un modelo del motor, en Simulink de Matlab, del cual se extrae la data, se preprocesa y se aplica el algoritmo LSSVM en regresión con Kernel no lineal RBF y la optimización de gamma se hace por validación cruzada. La medición del desempeño del modelo se utilizó la raíz cuadrada del error medio de predicción. Obteniendo buenos resultados.
References
Aller, J. M. (2006). Máquinas Eléctricas Rotativas:
Introducción a la Teoría General, Eeditorial
Eequinoccio, Universidad Simón Bolívar,
Caracas, Venezuela.
Álvarez, M.; Henao, R. y Duque, E. (2007).
Clasificación de Eventos Sísmicos Empleando
Procesos Gaussianos. Scientia Et Technica,
vol. XIII, núm. 35, agosto, 2007, pp. 145-150.
Basak, D.; Pal, S. and Chandra Patranabis, D.
(2007). “Support Vector Regression”, Neural
Information Processing – Letters and Reviews,
Vol. 11, No. 10, India.
Blaschke, F. (1972). “The principle of field
orientation as applied to the new transvector
closed loop control for rotating machines”,
Siemens Review, Vol 30, no. 5, pp. 217-220.
Díaz, J. L. (2000). Control por Campo Orientado
del Motor de Inducción con adaptación de los
parámetros por modelo de referencia, Tesis de
Maestría, UCLV, Santa Clara, Cuba.
Durán Acevedo, C. M. (2005). Diseño y
optimización de los subsistemas de un sistema
de olfato electrónico para aplicaciones
agroalimentarias e industriales, Universidad
Rovira i Virgili, Cataluña, España, pp. 59-60.
Huerta, P. F. y González, J. (2005). Estimación de
la Resistencia del Rotor en el Control Vectorial
Indirecto del Motor de Inducción utilizando
una Red Neuronal Artificial, México, D. F.
Jaramillo Garzón, J. A. (2007). Metodología de
optimización de los parámetros de control de
un algoritmo genético, Manizales Colombia.
Maldonado Alarcón, S. (2007). Utilización de
Support Vector Machines no Lineal y Selección
de Atributos para Credit Scoring, Chile.
Resendiz Trejo, J. A. (2006). Las máquinas de
vectores de soporte para identificación en
línea, México, D.F., Sep.
Rojas, I.; Pomares, H.; Gonzáles, J.; Bernier, J.;
Ros, E.; Pelayo, F. y Prieto, A. (2000).
“Analysis of the functional block involved in
the design of radial basis function networks”.
Neural Processing Letters, 12:1–17.
Rubio Flores, G. (2010). Modelos Avanzados de
Inteligencia Computacional para Aproximación
Funcional y Predicción de Series Temporales
en Arquitecturas Paralelas, España.
Rubio, G.; Guillen, A.; Herrera, L. J.; Pomares, H.
y Rojas, I. (2008). “Use of speci?c to problem
kernel functions for time series modeling”. In
ESTSP’08: Proceedings of the European
Symposium on Time Series Prediction, pp.
–186.
Rubio, G.; Pomares, H.; Rojas, I.; Herrera, L. J., y
Guillén, A. (2009). “Ef?cient optimization of
the parameters of LSSVM for regression versus
cross-validation error”. ICANN, pp. 406–415.
Seijas Fossi, C. y Caralli D’Ambrosio, A. (2004).
“Uso de las Máquinas de Vectores de Soporte
para la Estimación del Potencial de Acción
Celular”, Ingeniería UC, abril, vol. 11, número
, Universidad de Carabobo, Valencia,
Venezuela, pp. 56-61, 2004
Sixto Berrocal, J. (2004). Control Vectorial del
Motor de Inducción en Bajas Velocidades,
Instituto Politécnico Nacional, México, D.F.
Valdés, G. D. (2007). Prónostico Del Precio Del
Oro Mediante Least Square Support Vector
Machine (LSSVM), Univ. de las Américas.
Vapnik, V. (1995). The Nature of Statistical
Learning Theory, Springer-Verlag, New York.
Vapnik, V. and Lerner, A. (1963). “Pattern
recognition using generalized portrait method”,
Automation and Remote Control, 24.
Vas, P. (1990). Vector control of AC machines:
Clarendon Press Oxford.
Villasana, S.; Caralli, A.; Seijas, C.; Villanueva,
C.; Saenz L. y Arteaga, F. (2006). “Un
novedoso método para estimar la resistencia
rotórica del motor de inducción usando
máquinas de vectores de soporte”, Rev.
Ingeniería UC. Vol. 13, No. 1, Venezuela.
Wang, H. and Hu, D. (2005). Comparison of SVM
and LSSVM for regression, Shanghai, Jiao
Tong University, IEEE Press.
Xu, R. R., Bian, G. X and Chen T. L. (2005).
“Discussion about nonlinear time series
prediction using least squares support vector
machine". Communications in Theoretical
Physics, 43:1056–1060.
Downloads
Published
Versions
- 2013-01-02 (5)
- 2013-01-02 (4)
- 2013-01-02 (3)
- 2013-01-02 (2)
- 2022-11-08 (1)
How to Cite
Issue
Section
License
Copyright (c) 2022 REVISTA COLOMBIANA DE TECNOLOGIAS DE AVANZADA (RCTA)
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors publishing in this journal agree to the following conditions:
- Authors retain the moral rights of authorship and grant the journal the right of first publication of the work. This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0 DEED), allowing third parties to use the work provided appropriate credit is given to the authors and the first publication in this journal. Commercial use of the work is not permitted, and derivative works cannot be created.
- Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the article (for example, including it in an institutional repository or publishing it in a book), provided that the work is clearly indicated as having first been published in this journal.
- Authors are permitted and encouraged to post their work online (e.g., on institutional or personal websites) before and during the review and publication process, as it can lead to productive exchanges and greater and faster dissemination of the published work.