Síntesis de placas de níquel recubiertas mediante electrodeposición con NixSy

Autores/as

DOI:

https://doi.org/10.24054/rcta.v1i47.4355

Palabras clave:

nanotecnología, electrodeposición, ingeniería de capas, azufre, níquel

Resumen

El presente artículo tiene como objetivo analizar los parámetros de corriente, voltaje y tiempo en la electrodeposición de nanocapas de sulfuro de níquel sobre placas de níquel puro mediante una vía de síntesis basada en variaciones del número de ciclos (1, 3, 4 y 7). Cada ciclo consta de cuatro escalones de voltaje diferentes en el rango de (0.54–2.4) V, los cuales se repiten de acuerdo con el número de ciclos correspondiente. Como electrolito se utilizó una solución de nitrato de níquel hexahidratado (0.05 mol/L) y tiosulfato de sodio pentahidratado (0.1 mol/L). Los valores de voltaje presentan una alta estabilidad, con oscilaciones de ±0.2 V, lo que indica que los métodos empleados permiten un elevado control sobre el proceso de electrodeposición. Adicionalmente, se obtuvo una ganancia de masa en el rango de (0.44–6.57) mg para las electrodeposiciones realizadas.

Descargas

Los datos de descarga aún no están disponibles.

Referencias

K. Richardson et al., “Earth beyond six of nine planetary boundaries”, Science Advances, vol. 9, núm. 37, sep. 2023, doi:10.1126/sciadv.adh2458.

B. Sakschewski et al., Planetary Health Check 2025 A Scientific Assessment of the State of the Planet. 2025. doi:10.48485/pik.2025.017.

A. O. Oni, K. Anaya, T. Giwa, G. Di Lullo, y A. Kumar, “Comparative assessment of blue hydrogen from steam methane reforming, autothermal reforming, and natural gas decomposition technologies for natural gas-producing regions”, Energy Convers. Manag., vol. 254, p. 115245, 2022, doi:10.1016/j.enconman.2022.115245.

N. M Santhosh, S. Gupta, V. Shvalya, M. Kosicek, J. Zavasnik, y U. Cvelbar, “Advancing Oxygen Evolution Catalysis with Dual-Phase Nickel Sulfide Nanostructures”, Energy & Fuels, vol. 39, núm. 2, pp. 1375–1383, ene. 2025, doi:10.1021/acs.energyfuels.4c05182.

Y. Chen et al., “Nickel sulfide-based electrocatalysts for overall water splitting”, International Journal of Hydrogen Energy, vol. 48, núm. 72, pp. 27992–28017, ago. 2023, doi:10.1016/j.ijhydene.2023.04.023.

R.-C. Li et al., “One-step controlled electrodeposition nickel sulfides heterointerfaces favoring the desorption of hydroxyl groups for efficient hydrogen generation”, Rare Metals, vol. 43, núm. 9, pp. 4377–4386, 2024, doi:10.1007/s12598-024-02806-6.

Z. Wan et al., “Interface engineering of NiS/NiCo2S4 heterostructure with charge redistribution for boosting overall water splitting”, J. Colloid Interface Sci., vol. 653, pp. 795–806, 2024, doi:10.1016/j.jcis.2023.09.117.

S. Haghverdi Khamene, N. van Dalen, M. Creatore, y M. N. Tsampas, “Structural and Electrochemical Evolution of Nickel Sulfides During Alkaline Hydrogen Evolution Reaction”, ChemSusChem, dic. 2025, doi:10.1002/cssc.202501880.

C. Lyu et al., “Electrodeposition and Optimisation of Amorphous Ni x S y Catalyst for Hydrogen Evolution Reaction in Alkaline Environment”, Chemistry – A European Journal, vol. 30, núm. 66, nov. 2024, doi:10.1002/chem.202403030.

P. Wang et al., “Interface Engineering of NixSy@MnOxHy Nanorods to Efficiently Enhance Overall-Water-Splitting Activity and Stability”, Nano-Micro Letters, vol. 14, núm. 1, p. 120, dic. 2022, doi:10.1007/s40820-022-00860-2.

W. Tan y H. He, “One-step electrodeposition of W, Mo-Ni 3 S 2 /NF catalyst: an efficient hydrogen evolution electrode for alkaline media”, RSC Advances, vol. 15, núm. 47, pp. 39355–39367, 2025, doi:10.1039/D5RA07318A.

R. Li, P. Kuang, S. Wageh, A. A. Al-Ghamdi, H. Tang, y J. Yu, “Potential-dependent reconstruction of Ni-based cuboid arrays for highly efficient hydrogen evolution coupled with electro-oxidation of organic compound”, Chemical Engineering Journal, vol. 453, p. 139797, 2023, doi:10.1016/j.cej.2022.139797.

I. A. Poimenidis, M. Lykaki, N. Papakosta, P. A. Loukakos, N. Kallithrakas Kontos, y M. Konsolakis, “One-step electrodeposition of NiS heterostructures on nickel foam electrodes for hydrogen evolution reaction: On the impact of thiourea content”, Results Chem., vol. 6, p. 101216, 2023, doi10.1016/j.rechem.2023.101216.

D. Montgomery y C. St, Design and Analysis of Experiments, 9th Edition. 2022.

D. McKenzie, “Designing and analysing powerful experiments: practical tips for applied researchers”, Fiscal Studies, vol. 46, núm. 3, pp. 305–322, sep. 2025, doi:10.1111/1475-5890.70003.

C. Miao et al., “Facile Electrodeposition of Amorphous Nickel/Nickel Sulfide Composite Films for High-Efficiency Hydrogen Evolution Reaction”, ACS Appl. Energy Mater., vol. 4, núm. 1, pp. 927–933, ene. 2021, doi:10.1021/acsaem.0c02863.

B. Qiao et al., “NixSy/NF composites assembled by sulfidation of nickel foam (NF) for highly effective capture of iodine”, Chemical Engineering Journal, vol. 479, p. 147864, 2024, doi:10.1016/j.cej.2023.147864.

S. Esmailzadeh, T. Shahrabi, Gh. Barati Darband, y Y. Yaghoubinezhad, “Pulse electrodeposition of nickel selenide nanostructure as a binder-free and high-efficient catalyst for both electrocatalytic hydrogen and oxygen evolution reactions in alkaline solution”, Electrochim. Acta, vol. 334, p. 135549, 2020, doi:10.1016/j.electacta.2019.135549.

B. Zhong, S. Wan, P. Kuang, B. Cheng, L. Yu, y J. Yu, “Crystalline/amorphous Ni/NixSy supported on hierarchical porous nickel foam for high-current-density hydrogen evolution”, Appl. Catal. B, vol. 340, p. 123195, ene. 2024, doi:10.1016/j.apcatb.2023.123195.

P. Kotei, N. Boadi, S. Saah, y M. Mensah, “Synthesis of Nickel Sulfide Thin Films and Nanocrystals from the Nickel Ethyl Xanthate Complex”, Advances in Materials Science and Engineering, vol. 2022, pp. 1–10, jul. 2022 doi:10.1155/2022/6587934.

Y.-K. Hsu, A. Mondal, Y.-Z. Su, Z. Sofer, K. Shanmugam Anuratha, y J.-Y. Lin, “Highly hydrophilic electrodeposited NiS/Ni3S2 interlaced nanosheets with surface-enriched Ni3+ sites as binder-free flexible cathodes for high-rate hybrid supercapacitors”, Appl. Surf. Sci., vol. 579, p. 151923, 2022, doi:10.1016/j.apsusc.2021.151923.

Publicado

2026-02-09

Número

Sección

Artículos

Cómo citar

[1]
“Síntesis de placas de níquel recubiertas mediante electrodeposición con NixSy”, RCTA, vol. 1, no. 47, pp. 202–208, Feb. 2026, doi: 10.24054/rcta.v1i47.4355.

Artículos similares

11-20 de 609

También puede Iniciar una búsqueda de similitud avanzada para este artículo.