MODELADO 3D DE OBJETOS USANDO MATLAB MEDIANTE SENSOR ULTRASÓNICO
DOI:
https://doi.org/10.24054/rcta.v1i23.1887Keywords:
Sistema electromecánico, sensor ultrasónico, reconstrucción de imagen, modelado tridimensional, procesamiento de datosAbstract
En este trabajo se presenta un sistema para la reconstrucción y modelado tridimensional (modelado 3D) de objetos, mediante la integración del sistema electromecánico, sensórico y computacional. El sistema electromecánico cuenta con un movimiento rotacional para la base del objeto y un movimiento vertical acoplado al sensor ultrasónico. La adquisición de datos se realiza mediante la medición de distancias del sensor ultrasónico al objeto, finalmente en MATLAB® se procesan los datos y se
reconstruye el modelo tridimensional.
References
Bernardi, F. y Holly R. (2002). The 3D Model
Acquisition Pipeline, en Computer Graphics
Forum, Vol. 21, No. 2.
Clymer, J. R. (1992). “Discrete Event Fuzzy
Airport Control”. IEEE Trans. On Systems,
Man, and Cybernetics, Vol. 22, No. 2.
Eleázar, A.; Flavio, P. y Pierre, B. (2007).
Inspección de piezas 3D: Revisión de la
literatura, Universidad Nacional de Colombia
en Revista Ingeniería e Investigación, Vol.
, No. 3.
González, R.; Woods, R. y Eddins, S. (2004).
Digital image processing using Matlab,
Editorial Gatesmark Publishing.
Janos, T. and Phillip, M. (2006). An inversion of
Freedman’s “image pulse” model in air,
Journal of the Acoustical Society of America.
Jiménez, A. F; Jiménez, F. R.; Sosa L. F. and
Pérez, E. F. (2013). Procesamiento digital de
imágenes de sensores remotos para
aplicaciones de agricultura de precisión,
Revista Colombiana de Tecnologías de
Avanzada, 2013, Vol. 1, No. 21, Colombia.
Nascak, L. and Koleda, P. (2011). Creating of 3D
picture in Matlab, Annals of DAAAM &
Proceedings.
Pardo, C. E; Gutierrez, E. A.; Jiménez, F. R.; Sosa
L. F. y Martínez L. A. (2013). Diseño e
implementación de un prototipo de sistema de
identificación y clasificación de piezas por
tratamiento digital de imágenes con acceso a
Ethernet y comunicación inalámbrica,
Revista Colombiana de Tecnologías de
Avanzada, 2013, Vol. 2, No. 22, Colombia.
Rodríguez, O. O.; Pineda, R. F. y Cárdenas P. F.
(2011). Herramientas EJS 3D/MATLAB para
el control del sistema no lineal aplicado al
péndulo invertido sobre carro deslizante,
Revista Colombiana de Tecnologías de
Avanzada, 2012, Vol. 1, No. 19, Colombia.
Tejado, J. (2005). Escaneado en 3D y prototipado
de piezas arqueológicas: Las nuevas
tecnologías en el registro, conservación y
difusión del patrimonio arqueológico, Revista
de la antigüedad, 2005, No. 8, España.
Torres, J. C.; Cano, P.; Melero, J.; España, M. y
Moreno, J. (2009). Aplicaciones de la
digitalización 3D del patrimonio. I Congreso
Internacional de Arqueología e Informática
Gráfica, Patrimonio e Innovación, junio,
Sevilla, España.
Valencia, J. (2009). Caracterización mediante
técnicas de ultrasonido de un laminado de
fibra de vidrio, Universidad Carlos III de
Madrid, España.
Downloads
Published
Versions
- 2014-01-02 (4)
- 2014-01-02 (3)
- 2014-01-02 (2)
- 2022-11-08 (1)
How to Cite
Issue
Section
License
Copyright (c) 2014 REVISTA COLOMBIANA DE TECNOLOGIAS DE AVANZADA (RCTA)
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors publishing in this journal agree to the following conditions:
- Authors retain the moral rights of authorship and grant the journal the right of first publication of the work. This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0 DEED), allowing third parties to use the work provided appropriate credit is given to the authors and the first publication in this journal. Commercial use of the work is not permitted, and derivative works cannot be created.
- Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the article (for example, including it in an institutional repository or publishing it in a book), provided that the work is clearly indicated as having first been published in this journal.
- Authors are permitted and encouraged to post their work online (e.g., on institutional or personal websites) before and during the review and publication process, as it can lead to productive exchanges and greater and faster dissemination of the published work.