Characterization of microbial consortia with pollutant-degrading potential in the municipality of Pamplona, Norte de Santander

Authors

  • Francy Juliana Velandia González Universidad de Pamplona
  • Juan David Granados Rincón Universidad de Pamplona
  • Jarol Derley Ramón Valencia Universidad de Pamplona
  • Alba Lucia Parra Universidad de Pamplona

DOI:

https://doi.org/10.24054/aaas.v7i1.773

Keywords:

Biofiltracion, Consorcios Microbianos, Ambientes Hostiles

Abstract

Currently, air bioremediation has become a topic of interest due to the large amount of emissions from different industries, which directly affect the earth's crust and biodiversity. Therefore, the implementation and improvement of pollutant purification technologies must be constant; an important aspect in the implementation of these technologies is their environmental compatibility, low operating cost, and minimal waste generation during operation.

The aim is to design an experimental biofilter for the treatment of pollutants from fixed sources such as artisanal brick kilns, which generate carbon monoxide, nitrogen oxides, sulfur oxides, volatile organic compounds (VOCs), and particulate matter. The study seeks to integrate the variables involved in a biological treatment such as biofilters, which represent a great scientific and operational challenge. For this reason, it is necessary to divide the study into two components: the microbiological aspect and the experimental assembly of the system.

The main challenge lies in the microbiological characterization, which will largely determine the efficiency of the biofilter. Therefore, it is necessary to experiment with different types of bacterial consortia and identify those that offer the highest contaminant removal rate from the air to be treated. This requires performing different isolations in various culture media to select one or more strains with a high capacity to remove the contaminants.

For this design, it is also necessary to consider the system for conveying the residual air to the reactor, as this fluid must be channeled from the emission source, which in this research will be controlled at a laboratory scale.

Downloads

Download data is not yet available.

References

Alberto, L. N. (2003). Biofiltración de aire contaminado con hidrocarburos. Congreso de Ingeniería Sanitaria y Ambiental AIDIS.

Astrid. (2007). Tratamiento biológico de COV.

Beatriz, E. F. (s.f.). Degradación de xileno y estireno en aire.

Beatriz, S. R. (2003). Tratamiento biológico de COV para fuentes fijas (p. 61). México.

Bohorquez B., E. A. (2014). Formulación de polielectrólitos usando Turbiscan y microscopía, enfocado en el rompimiento de emulsiones inversas. Revista Ambiental Agua, Aire y Suelo, 5(1).

Díaz, R., & Vega, J. C. (2013). Efecto de la variación de la carga orgánica en el desempeño de un reactor UASB (upflow anaerobic sludge blanket) tratando efluentes de una planta extractora de aceite de palma. Revista Ambiental Agua, Aire y Suelo, 4(1).

DiGiovanni, C., Li, L., Driver, R., & Callele, L. (2017). Cracking in welded steel platform structures during hot-dip galvanization. Engineering Failure Analysis, 79, 1031–1042.

Hincapié, A. A. (s.f.). Tratamiento biológico de compuestos.

Huyghe, P., Malet, L., Caruso, M., Georges, C., & Godet, S. (2017). On the relationship between the multiphase microstructure and the mechanical properties of a 0.2 C quenched and partitioned steel. Materials Science and Engineering: A, 701, 254–263.

Li, Q., Zhu, Y., & Guo, J. (2017). Microstructure and mechanical properties of resistance-welded NiTi/stainless steel joints. Journal of Materials Processing Technology, 249, 538–548.

López, D. F. A., Pereira, R. C., Castro, Y. A., Sánchez, H., & Sabirov, I. (2016). Desarrollo de un método de simulación física de zonas térmicamente afectadas en soldaduras de acero, para estudios de propagación de grietas por fatiga. Facultad de Ingeniería, 25(42), 33–54.

López Martínez, E., Vázquez Gómez, O., & Campillo Illanes, B. F. (2014). Estimación del esfuerzo de fluencia de soldaduras de aceros microaleados. Ingeniería Mecánica, Tecnología y Desarrollo, 5(1), 273–279.

Makhdoom, M. A., Ahmad, A., Kamran, M., Abid, K., & Haider, W. (2017). Microstructural and electrochemical behavior of 2205 duplex stainless steel weldments. Surfaces and Interfaces, 9, 189–195.

Michael, V. N. (2002). Investigaciones y experiencias con biofiltros en Nicaragua. Congreso Interamericano de Ingeniería Sanitaria y Ambiental.

Mohsenzadeh, M. S., & Mazinani, M. (2017). The effect of particle size on work hardening behavior of a low carbon steel with a composite-type microstructure. Materials Science and Engineering: A, 702, 113–124.

Parra, A., Quijano, A., & Meléndez, I. (2013). Influencia de los hidrocarburos aromáticos policíclicos (HAPs) y metales en la calidad del aire de Pamplona y sus efectos genotóxicos. Revista Ambiental Agua, Aire y Suelo, 4(2).

Ramírez-Soto, J. C. I., Salgado-López, J. M., Pérez-Quiroz, J. T., Pérez-López, T., Terán-Guillén, J., & Martínez-Madrid, M. (2016). Efecto del mantequillado en las propiedades mecánicas de uniones soldadas disímiles en barras de refuerzo para estructuras de concreto. Revista ALCONPAT, 6(3), 248–260.

Ramón, J. D. (2013). Determinación de compuestos orgánicos volátiles biogénicos en una atmósfera rural (Parque Natural de Valderejo). Revista Ambiental Agua, Aire y Suelo, 4(1).

Reyes-Carcasés, D., Fernández-Columbié, T., Alcántara-Borges, D., & Rodríguez-González, I. (2018). Soldadura con los electrodos revestidos E 6010 y E 7018 en acero AISI 1025. Minería y Geología, 34(1), 112–125.

Rosero Jiménez, R. A. (2017). Desarrollo y calificación de un procedimiento de soldadura en servicio de accesorio para tanque bajo diseño API650 y requerimientos de ASME sección IX con el proceso de soldadura SMAW.

Ruiz-Magaña, A. I. (2016). Dominios magnéticos en piezas de acero AISI 4340 soldado con electrodos revestidos. Ciencia & Futuro, 6(3), 61–81.

Singh, D. K., Raman, R. S., Maiti, S. K., Bhandakkar, T. K., & Pal, S. (2017). Investigation of role of alloy microstructure in hydrogen-assisted fracture of AISI 4340 steel using circumferentially notched cylindrical specimens. Materials Science and Engineering: A, 698, 191–197.

Soria, J., Reyes, F., Carrillo, R., García, F., Álvarez, H., & Silvia, L. (2015). Efecto del tratamiento térmico sobre las propiedades mecánicas y microestructura de un acero para tubería API 5CT J55. Ingeniería Investigación y Tecnología, 4.

Terán, J., Alcántara, M., Arroyo, M., Del Valle, A., & Lomelí, M. (2017). Evaluación de la integridad estructural del acero SAE/AISI 1045 soldado por arco manual con electrodo revestido (SMAW). Revista SOMIN.

Uso de biorreactores para controlar la contaminación del aire. (2004, junio). Uso de biorreactores para controlar la contaminación del aire. Estados Unidos.

Vargas, M. J. Q., Quijano, A., & Meléndez, I. (2014). Genotoxicidad en el aire de la Cúcuta-Colombia en muestras del PM 2.5. Revista Ambiental Agua, Aire y Suelo, 4(2).

Wang, H. S., Yuan, G., Kang, J., Cao, G. M., Li, C. G., Misra, R. D. K., & Wang, G. D. (2017). Microstructural evolution and mechanical properties of dual phase steel produced by strip casting. Materials Science and Engineering: A, 703, 486–495.

Published

2016-06-30

How to Cite

Velandia González, F. J., Granados Rincón, J. D., Ramón Valencia, J. D., & Parra, A. L. (2016). Characterization of microbial consortia with pollutant-degrading potential in the municipality of Pamplona, Norte de Santander. REVISTA AMBIENTAL AGUA, AIRE Y SUELO, 7(1), 1–7. https://doi.org/10.24054/aaas.v7i1.773

Issue

Section

Artículos

Most read articles by the same author(s)

1 2 > >>