Incidencia de la variación de peso en bolsas de leche en envasadoras asépticas ocasionado por sellado servoasistido Festo

Said Ricardo Reyes Pino; Camilo Ernesto Pardo Beainy; William Fabian Chaparro Becerra

doi:10.24054/rcta.v1i43.2875

Authors

Said Ricardo Reyes Pino Universidad Santo Tomás https://orcid.org/0000-0001-7529-3926
Camilo Ernesto Pardo Beainy Universidad Santo Tomás https://orcid.org/0000-0003-0012-3679
William Fabian Chaparro Becerra Universidad Santo Tomás https://orcid.org/0000-0002-3554-1531

DOI:

https://doi.org/10.24054/rcta.v1i43.2875

Keywords:

horizontal sealing, variation, weight, servo motor, packaging machine

Abstract

The objective of this study was to determine the cause of weight variation of up to 60g in milk bags in an aseptic packaging machine, variables directly related to the weight of the bags were analyzed, leading to the determination that the cause was the horizontal sealing with Festo servo motors, the actuation and synchronization generated by the communication between the PLC and the servo motor controller were identified as the culprit, this system was homologated due to worldwide disruptions in the acquisition of technological equipment, as a result of identifying and correcting the system, a weight variation of +/-3g was achieved in the packaging, which aligns with quality standards, this improvement was attributed to the optimization of routine execution times and data packet transmission times.

Downloads

Download data is not yet available.

References

G. L. Robertson, “Ultrahigh Temperature Treatment (UHT): Aseptic Packaging,” in Reference Module in Food Science, Elsevier, 2016. doi: 10.1016/b978-0-08-100596-5.00810-6. DOI: https://doi.org/10.1016/B978-0-08-100596-5.00810-6

M. Restrepo and N. Nieto, “Actualización de control en envasadora vertical Robert Bosch SVK 2500A,” Unidad Central del Valle, Tulua, 2017.

L. Baena, “Repotencialización tecnológica para aumentar la productividad en la maquina individual Flow Pack Record Jaguar.,” 2017.

X. Tóth and J. Töth, “Linear axis positioning with industrial servo motor,” Apr. 2014. DOI: https://doi.org/10.15660/AUOFMTE.2014-1.3021

J. Carlos, F. García, L. Fernando, and C. Castaño, “Introducción al control remoto de servomotores industriales,” Universidad de Sevilla, Sevilla, 2021.

A. Kuan, Y. Wu, and T. Lima -Perú, “Mejora del proceso en el envasado aséptico de bolsa UHT - GLORIA SA,” Universidad Nacional Agraria La Molina, 2017.

René Tinoco, E. Bermea, F. Gamboa, and B. Rubio, “Identificación de las causas de variación en el proceso de envasado a través del control estadístico de procesos.,” Revista Iberoamericana de Ciencias, 2017.

Ministerio de la Protección social, “Decreto 616 DE 2006,” 2006.

R. Automation, “Variador de CA de frecuencia ajustable PowerFlex serie 520.” [Online]. Available: http://www.rockwellautomation.com/literature

Festo SE & Co. KG, “CMMT-AS Servo drive,” 2023. Accessed: Mar. 01, 2023. [Online]. Available: https://www.festo.com/mx/es/p/regulador-de-servoaccionamientos-id_CMMT_AS/

Festo SE & Co. KG, “CMMT servo drive commissioning with Allen-Bradley PLC trough Ethernet/IP network,” Esslingen, 2023. [Online]. Available: www.festo.com

R. Automation, “Controladores CompactLogix 5370.” [Online]. Available: http://www.rockwellautomation.com/literature