Tecnicificación para el control de presión y emulación de riego usando el control lógico programable y software Totally Integrated Automation
DOI:
https://doi.org/10.24054/rcta.v2i32.117Keywords:
automatización, control, PID, presiónAbstract
El presente trabajo describe el desarrollo de la tecnificación en el control de presión para una planta piloto de emulación de riego mediante un controlador lógico programable (PLC) intervenido por software Totally Integrated Automation (TIA) respondiendo a la variación de la presión por control automático PID.
References
L Márquez, YA Lara, F Ángulo, ´´Prototipo de control de acceso a aulas y registro automático de asistencia´´ Universidad de Pamplona.
JE Castellanos, RT Alvarado ´´Diseño de estrategia de control avanzado para sistema de celdas de flotación en el tratamiento de aguas de producción de petróleo gas´´ Universidad de Pamplona.
SIEMENS, Autómata programable S7-1200, configuración e instalación.
SIEMENS, Software de sistema para S7-1200. Diseño de programas.
SIEMENS, Manual Simatic S7-1200(www.siemens.com).
PORRAS C, Alejandro. Autómatas Programables. Fundamento, manejo y practica. Edit. McGraw Hill.
SIMON, André. Autómatas Programables. Programación, automatismos y lógica programada.
Y.-C. Wu y C.-F. Fan, «Automatic test case generation for structural testing of function block diagrams», Inf. Softw. Technol., vol. 56 (10), pp. 1360-1376, oct. 2014.
A. Mader, «A Classification of PLC Models and Applications», en Discrete Event Systems, vol. R. Boel y G. Stremersch, Eds. Springer US, 2000, pp. 239-246.
L. Wang, G. Adamson, M. Holm, y P. Moore, review of function blocks for process planning and control of manufacturing equipment», J. Manuf. Syst., vol. 31 (3), pp. 269-279, 2012.
International Electrotechnical Commission, «IEC 61499-1: Function Blocks - Part 1 Architecture», Int. Stand. First Ed. Geneva, vol. 1, 2005.
I. E. Commission, «Programmable Controllers - Part 3: Programming languages», vol. 3, 2003.
N. Völker y B. J. Krämer, «Automated verification of function block-based industrial control systems», Sci. Comput. Program., vol. 42 (1), pp. 101-113, 2002.
C. Yuan y P. Ferreira, «An integrated rapid prototyping environment for reconfigurable manufacturing systems», en ASME 2003 International Mechanical Engineering Congress and Exposition, 2003, pp. 737-744.
C. Yuan y P. Ferreira, «An integrated environment for the design and control of deadlock - free flexible manufacturing cells», en ASME 2004 International Mechanical Engineering Congress and Exposition, 2004, pp. 471-481.
Complemento al libro “Advanced PID Control” de Complemento al libro “Advanced PID Control” de Aström y Hägglund, 2005
Downloads
Published
Versions
- 2018-07-02 (3)
- 2018-07-02 (2)
- 2020-10-06 (1)
How to Cite
Issue
Section
License
Copyright (c) 2018 REVISTA COLOMBIANA DE TECNOLOGIAS DE AVANZADA
![Creative Commons License](http://i.creativecommons.org/l/by-nc/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors publishing in this journal agree to the following conditions:
- Authors retain the moral rights of authorship and grant the journal the right of first publication of the work. This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0 DEED), allowing third parties to use the work provided appropriate credit is given to the authors and the first publication in this journal. Commercial use of the work is not permitted, and derivative works cannot be created.
- Authors may enter into separate, additional contractual agreements for the non-exclusive distribution of the journal's published version of the article (for example, including it in an institutional repository or publishing it in a book), provided that the work is clearly indicated as having first been published in this journal.
- Authors are permitted and encouraged to post their work online (e.g., on institutional or personal websites) before and during the review and publication process, as it can lead to productive exchanges and greater and faster dissemination of the published work.